Institute of Microelectronics (IME), Agency for Science, Technology and Research (A*STAR), 2 Fusionopolis Way, Innovis #08-02, Singapore 138634, Republic of Singapore ...

The microfabricated sensor is constructed using silicon carbide as the substrate and aluminum nitride (AlN) as the piezoelectric film. The piezoelectric coefficient (d33) of AlN is measured using ...

Based on multi-walled carbon nanotube (MWCNT)/cotton fabric (CF) piezoresistive sensor and polyvinylidene fluoride (PVDF) piezoelectric sensor, a dual-mode tactile sensor (MCP-DTS) featuring high ...

High Curie temperature and high piezoelectric constant are challenges that most piezoelectric ceramics difficult to be ...

The knock sensor is made up of a piezoelectric element. A working principle for piezoelectric elements involves the transmission of an electrical current in response to detecting a change in pressure ...

Taiyo Yuden Co., Ltd. (OTCMKTS:TYOYY – Get Free Report) saw a large decrease in short interest in February. As of February 28th, there was short interest totalling 500 shares, a decrease of 37.5% from ...

Fluidic elastomer actuators (FEAs) are pressurized tubes or membranes that can be easily rearranged into complex mechanical devices. They have gained significant attention for their lightweight, ...

The research found that washable and durable e-textiles are the key to satisfying consumer requirements for future wearable ...

A group of researchers from Shibaura Institute of Technology (SIT) developed the Dielectric Elastomer Sensor (DES) to measure the pressure and vibration response in soft fluidic structures.

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.