12Remove the pushrod-checking tool and count how many turns out the tip is.For each full turn out, 0.050-inch length should be added to baseline measurement of the checking tool. In our case, two ...

With the journals measured, it’s time to set up a dial bore gauge to measure the inside diameter of the rod bearings. To begin, we set up our dial bore gauge at slightly more than 2.100-inches ...

Place the ball in the cup and measure the overall length including the ball. Then subtract half the ball diameter (0.1562-inch) to get the overall length. As an example, if the pushrod measures 7. ...

Everything You’ll Need To Measure Pushrods There are a lot of ways to measure pushrod length. Thankfully, the most basic methods are viable for this type of engine.

SAR 940 Racing Engine - Beyond All Measure. ... "An 825 ci engine will typically use a 4.800-inch bore with a 5.700 stroke. Here, we're using what cleans up to a 5.080 bore with a 5.800 stroke.

Let’s use a stock 5.3-liter engine with a 3.78” bore as our example. Stock gap for this calculates as 3.78 x .004 = .01512” gap, ... A feeler gauge is used to measure the gap.