2024年11月2日 · Meanwhile my $250 TSDZ2 middrive kit use both a cadence sensor and a torque sensor. When you reach cruising speed on a T/S bike, the pedal pressure falls off. Troque sensor signal falls off. What should the motor do? Knowing how fast the pedals are spinning, the motor algorithm decides whether to maintain power, start slowing down, or cut power.

2021年12月13日 · Next is to install the Torque sensor bottom bracket, power it, and test its output range. The potential issue here is if the torque sensor output starts at a higher value than the throttle. like if the throttle starts at .8V, but the torque sensor starts at 1.2V.

2024年12月9日 · Of course there are torque sensors and a high-resolution cadence sensor, which are claimed to measure pedal inputs at 1,000 times per second. The motor is also able to detect pitch and vibrations thanks to its inertial sensors, so it knows the difference between a smooth uphill bike path and a technical singletrack pinch-climb.

2020年4月2日 · Hello guys, I’m experiencing what I believe to be a torque sensor issue, recently the bike has started to have a jerking sensation while pedaling, the sensation is more pronounced in rider assist level 4 and 5 than 1-3, mileage on the …

2023年12月27日 · It should be relatively easy to adapt a hal sensor to either the brake lever or throttle that will allow a variable input to a controller to adjust the amount of regeneration/braking. My KT Controller and Display allows for 5 levels of regeneration/braking power.

2018年2月28日 · The torque plus cadence sensor on my CCS gives a very fluid and natural feel to the PAS. You can turn the torque sensor off in advanced settings, and because the cadence sensor reads the input from the rear cassette instead of the crank, with over 100 inputs per second, it is still remarkably smooth.

2023年12月5日 · Here is one that is going out in 45 minutes. It is a mid-drive with a torque sensor and active sensor of cadence, in other words it has a power meter. It is a 90 Nm 500W cargo motor with a premium battery. The owner rides Mt. Tam where mountain biking was invented. It is geared for climbing.

2023年12月5日 · My TMM4 torque sensor senses only 2 things: (1) Rear dropout strain due to chain tension — a good proxy for crank torque at fixed crank length — and (2) the presence or absence of cassette rotation. (Motor's enabled only when the cassette is turning.) If my Rook has a sensor capable of returning a reliable crank speed, it's well-hidden.

2024年12月24日 · The torque sensor, PWR+ programming, and expanded battery options make this model a true step up in power and range capabilities. Components The XPeak 2.0 brings some smart component upgrades that address stability and ride confidence—areas where the original had room to grow.

2020年7月15日 · This however was not the case on all the bikes I tried. I also found the converse to be true with the torque sensor on a couple of bikes. 5 - With experience, I realized that my comfort level with the cadence and torque sensor performance varied during a ride. What I liked at the start was quite different than at the end.