![](/rp/kFAqShRrnkQMbH6NYLBYoJ3lq9s.png)
Reference Material Supermicro X9/X10/X11 Fan Speed Control
2016年5月30日 · Reference material regarding fan speed control on SuperMicro X9/X10/X11 motherboards. This has been pieced together over some time and I finally got that "aha!" moment yesterday where it all came together. A bit of testing confirmed that this is effectively correct (even if SM might disagree on some fine details).
Supermicro H11DSi Stuck at DXE-PCI Bus Assign Resources...
2025年1月1日 · Here’s the situation: I purchased several Supermicro H11DSi servers with 7k62 processors. Initially, the original version of IPMI couldn’t successfully mount system images via SMB. After upgrading the IPMI firmware on one server to the latest version 01.52.21, I was able to mount and install the system successfully.
SuperMicro RAID Windows can't see drives (Solved)
2016年1月23日 · The Supermicro page for that board does not even list a driver. btw, Windows does not need a third party RAID driver for Intel onboard SATA RAID. It should be able to see the RAID drive(s) natively.
Public FTP with various Supermicro BIOS and firmware
2020年6月5日 · Abacus is a Supermicro distributor in Czech Republic. HTH. Reactions: Wasmachineman_NL. B. BlueFox
Supermicro IPMI Fan Control on Windows - ServeTheHome Forums
2019年10月10日 · From the Supermicro IPMI interface, I could see this fan sometimes go to 0 RPM resulting in the triggered alert and the fans to run briefly at max speeds before reverting back to low speeds. The standard speed setup with the 0 low threshold results in a quiet workstation and is fine for now, but I would like more control over the raw speeds.
Reference Material Supermicro IPMI Default Login and Password
2016年1月5日 · When logging into a Supermicro IPMI interface, one is prompted for a login (username) and password. On modern Supermicro IPMI interfaces the default login/ password is: Login: ADMIN; Password: ADMIN; Here is what the Supermicro web management login looks like:
Help Silence SuperMicro Server Fan Array - ServeTheHome Forums
2016年1月6日 · The cheapest place I found them was on the Supermicro store for $21.75. From my own experience I would caution against the 5 fan MCP-320-82603-0N fanwall linked above. One server came with those and and while not horrible they were nowhere near as …
Supermicro noise levels - ServeTheHome Forums
2011年5月28日 · Right now I am deciding if I should go with this new Backblaze 3.0 deal, or stay with the Supermicro deal. If I go Supermicro I will definitely try your fan solution. The thing that gives me pause is the whole vibration issue. Supermicro is always sure to warn you to only use enterprise drives in a 24-bay enclosure.
Help Quieting My Supermicro Servers - ServeTheHome Forums
2023年2月8日 · Supermicro 1U-X10SLH-N6-ST031-4BLTQ-1PS: (Honestly can't make sense of Supermicro's model names so that's what is written on the label from my seller haha.) Here is a picture of the fan array that's currently in it: Supermicro 847-12: I wasn't sure if I could pull the actual fans out of these brackets, then just slip in Noctuas or something.
Supermicro X10QBi Hangs when trying to enter Setup (Solved)
2020年12月19日 · Supermicro AOM-X10QBi-A card to see the boot screen. It does not matter if I set the VGA in the Bios to Auto, Offboard, or Onboard. It seems I can't get it to "Enter setup" if any Bios changes have been made. Regardless if that's on VGA, with or without external graphics cards installed (even with only one).